Filename | Size |
| 0. Introduction/1 Welcome.mp4 | 23.6 MB |
| 0. Introduction/2 What you should know before watching this course.mp4 | 1.7 MB |
| 0. Introduction/3 Using the exercise files.mp4 | 1.6 MB |
| 0. Introduction/4 Setting up the 3ds Max project structure.mp4 | 6.8 MB |
| 0. Introduction/5 A quick word on gamma and unit settings.mp4 | 6.3 MB |
| 0. Introduction/6 3ds Max customization tweaks.mp4 | 11.8 MB |
| 1. Modeling with splines/1 Creating the breastplate spline.mp4 | 13.4 MB |
| 1. Modeling with splines/2 Setting up the polygon faces.mp4 | 7 MB |
| 1. Modeling with splines/3 Extrudes and Spherify.mp4 | 13.1 MB |
| 1. Modeling with splines/4 Creating crease sets.mp4 | 10.8 MB |
| 2. Creating Complex Shapes from Components/1 Creating a working grid.mp4 | 6.9 MB |
| 2. Creating Complex Shapes from Components/2 Setting up our screw component.mp4 | 9.8 MB |
| 2. Creating Complex Shapes from Components/3 Duplicating and welding the components.mp4 | 8.4 MB |
| 2. Creating Complex Shapes from Components/4 Creating the cap with good topology.mp4 | 13.4 MB |
| 2. Creating Complex Shapes from Components/5 Extruding the thread.mp4 | 10.5 MB |
| 2. Creating Complex Shapes from Components/6 Cleaning up the thread.mp4 | 12.9 MB |
| 2. Creating Complex Shapes from Components/7 Smoothing the thread.mp4 | 10.3 MB |
| 2. Creating Complex Shapes from Components/8 Distribution.mp4 | 12.6 MB |
| 3. Building with Primitives/1 Creating the base cylinders.mp4 | 18.3 MB |
| 3. Building with Primitives/2 Extruding with splines.mp4 | 16.2 MB |
| 3. Building with Primitives/3 Adding detail_ Part 1.mp4 | 18.9 MB |
| 3. Building with Primitives/4 Adding detail_ Part 2.mp4 | 22.4 MB |
| 3. Building with Primitives/5 Creating the clamp holes.mp4 | 22.3 MB |
| 3. Building with Primitives/6 Applying subdivision creasing.mp4 | 11.9 MB |
| 3. Building with Primitives/7 Screw crease fixes.mp4 | 13.7 MB |
| 3. Building with Primitives/8 Insert subdivision.mp4 | 10 MB |
| 3. Building with Primitives/9 Valve subdivision.mp4 | 11.9 MB |
| 4. Modeling with Edge Cuts/1 Creating the stencil.mp4 | 11.3 MB |
| 4. Modeling with Edge Cuts/2 Positioning the stencil and prototyping.mp4 | 8.9 MB |
| 4. Modeling with Edge Cuts/3 Making the cuts.mp4 | 12.3 MB |
| 4. Modeling with Edge Cuts/4 Cleaning the topology into quads.mp4 | 9.3 MB |
| 4. Modeling with Edge Cuts/5 Extruding the shapes.mp4 | 14.4 MB |
| 4. Modeling with Edge Cuts/6 Creating crease sets.mp4 | 9.5 MB |
| 5. Box Modeling/1 Creating the sphere.mp4 | 7.5 MB |
| 5. Box Modeling/2 Applying the chamfer.mp4 | 10 MB |
| 5. Box Modeling/3 Adding subdivision.mp4 | 7.5 MB |
| 5. Box Modeling/4 Creating the port guard base geometry.mp4 | 11.8 MB |
| 5. Box Modeling/5 Adding the screw hole.mp4 | 10.8 MB |
| 5. Box Modeling/6 Duplicating the mesh.mp4 | 5 MB |
| 5. Box Modeling/7 Cutting and welding.mp4 | 11 MB |
| 5. Box Modeling/8 Adding subdivision.mp4 | 9.1 MB |
| 5. Box Modeling/9 Creating subdivision creases.mp4 | 13.1 MB |
| Conclusion/1 What's next_.mp4 | 7.9 MB |
| Ex_Files_3dsMax_HardSurface.zip | 273.2 MB |