Filename | Size |
| 1.Introduction/01.Migrating your AutoCAD standards.en.srt | 2.4 KB |
| 1.Introduction/01.Migrating your AutoCAD standards.mp4 | 5 MB |
| 1.Introduction/02.What you should know before watching this course.en.srt | 2.5 KB |
| 1.Introduction/02.What you should know before watching this course.mp4 | 3.6 MB |
| 1.Introduction/03.The new AutoCAD 2019 icon refresh.en.srt | 2.9 KB |
| 1.Introduction/03.The new AutoCAD 2019 icon refresh.mp4 | 3.1 MB |
| 10.9. Working with Fill Patterns/46.Using Revit fill patterns to replicate your CAD hatch patterns.en.srt | 2.7 KB |
| 10.9. Working with Fill Patterns/46.Using Revit fill patterns to replicate your CAD hatch patterns.mp4 | 4 MB |
| 10.9. Working with Fill Patterns/47.Editing fill patterns.en.srt | 9.2 KB |
| 10.9. Working with Fill Patterns/47.Editing fill patterns.mp4 | 14.1 MB |
| 10.9. Working with Fill Patterns/48.Creating a new fill pattern.en.srt | 10.8 KB |
| 10.9. Working with Fill Patterns/48.Creating a new fill pattern.mp4 | 17.4 MB |
| 10.9. Working with Fill Patterns/49.Duplicating a fill pattern.en.srt | 8.1 KB |
| 10.9. Working with Fill Patterns/49.Duplicating a fill pattern.mp4 | 13.3 MB |
| 11.Conclusion/50.Next steps.en.srt | 2.3 KB |
| 11.Conclusion/50.Next steps.mp4 | 4.3 MB |
| 2.1. Why Migrate Your AutoCAD Standards into Revit/04.Communicating your design intent from Revit to AutoCAD.en.srt | 5.2 KB |
| 2.1. Why Migrate Your AutoCAD Standards into Revit/04.Communicating your design intent from Revit to AutoCAD.mp4 | 8.6 MB |
| 2.1. Why Migrate Your AutoCAD Standards into Revit/05.Standards 101 - From Revit to AutoCAD.en.srt | 5.7 KB |
| 2.1. Why Migrate Your AutoCAD Standards into Revit/05.Standards 101 - From Revit to AutoCAD.mp4 | 8.5 MB |
| 3.2. AutoCAD Layers As Standards/06.Layer management with layer states.en.srt | 5.1 KB |
| 3.2. AutoCAD Layers As Standards/06.Layer management with layer states.mp4 | 6.2 MB |
| 3.2. AutoCAD Layers As Standards/07.Layer naming philosophy.en.srt | 6.6 KB |
| 3.2. AutoCAD Layers As Standards/07.Layer naming philosophy.mp4 | 8.1 MB |
| 3.2. AutoCAD Layers As Standards/08.Layer colors.en.srt | 6.7 KB |
| 3.2. AutoCAD Layers As Standards/08.Layer colors.mp4 | 9.6 MB |
| 3.2. AutoCAD Layers As Standards/09.Layer linetypes.en.srt | 11.3 KB |
| 3.2. AutoCAD Layers As Standards/09.Layer linetypes.mp4 | 14.4 MB |
| 3.2. AutoCAD Layers As Standards/10.Layer lineweights.en.srt | 7.2 KB |
| 3.2. AutoCAD Layers As Standards/10.Layer lineweights.mp4 | 10.7 MB |
| 3.2. AutoCAD Layers As Standards/11.Using the BYLAYER settings.en.srt | 8.9 KB |
| 3.2. AutoCAD Layers As Standards/11.Using the BYLAYER settings.mp4 | 11.8 MB |
| 4.3. Bringing Your AutoCAD Layers into Revit/12.Importing a CAD file.en.srt | 9.3 KB |
| 4.3. Bringing Your AutoCAD Layers into Revit/12.Importing a CAD file.mp4 | 14.5 MB |
| 4.3. Bringing Your AutoCAD Layers into Revit/13.Linking a CAD file.en.srt | 9.7 KB |
| 4.3. Bringing Your AutoCAD Layers into Revit/13.Linking a CAD file.mp4 | 13.4 MB |
| 4.3. Bringing Your AutoCAD Layers into Revit/14.Querying CAD layers.en.srt | 9.6 KB |
| 4.3. Bringing Your AutoCAD Layers into Revit/14.Querying CAD layers.mp4 | 14.2 MB |
| 4.3. Bringing Your AutoCAD Layers into Revit/15.Managing a linked CAD file.en.srt | 9.6 KB |
| 4.3. Bringing Your AutoCAD Layers into Revit/15.Managing a linked CAD file.mp4 | 14.8 MB |
| 4.3. Bringing Your AutoCAD Layers into Revit/16.Using visibility and graphics overrides with CAD layers.en.srt | 10.7 KB |
| 4.3. Bringing Your AutoCAD Layers into Revit/16.Using visibility and graphics overrides with CAD layers.mp4 | 15.9 MB |
| 4.3. Bringing Your AutoCAD Layers into Revit/17.Exploding a CAD file.en.srt | 10.2 KB |
| 4.3. Bringing Your AutoCAD Layers into Revit/17.Exploding a CAD file.mp4 | 16.5 MB |
| 5.4. Setting Up Your Layers to Industry Standards/18.Setting up standards for layers in AutoCAD.en.srt | 2.9 KB |
| 5.4. Setting Up Your Layers to Industry Standards/18.Setting up standards for layers in AutoCAD.mp4 | 3.8 MB |
| 5.4. Setting Up Your Layers to Industry Standards/19.Naming and setting the layers to a known standard.en.srt | 10.9 KB |
| 5.4. Setting Up Your Layers to Industry Standards/19.Naming and setting the layers to a known standard.mp4 | 13.8 MB |
| 5.4. Setting Up Your Layers to Industry Standards/20.Setting up an AutoCAD DWT file.en.srt | 12 KB |
| 5.4. Setting Up Your Layers to Industry Standards/20.Setting up an AutoCAD DWT file.mp4 | 16.8 MB |
| 5.4. Setting Up Your Layers to Industry Standards/21.Putting objects onto standard layers.en.srt | 12.2 KB |
| 5.4. Setting Up Your Layers to Industry Standards/21.Putting objects onto standard layers.mp4 | 14.6 MB |
| 5.4. Setting Up Your Layers to Industry Standards/22.Purging out layers that are not required.en.srt | 7.6 KB |
| 5.4. Setting Up Your Layers to Industry Standards/22.Purging out layers that are not required.mp4 | 9 MB |
| 6.5. Using Additional Settings in Revit/23.Additional settings in Revit.en.srt | 4.4 KB |
| 6.5. Using Additional Settings in Revit/23.Additional settings in Revit.mp4 | 7.4 MB |
| 6.5. Using Additional Settings in Revit/24.Fill patterns.en.srt | 9 KB |
| 6.5. Using Additional Settings in Revit/24.Fill patterns.mp4 | 13.9 MB |
| 6.5. Using Additional Settings in Revit/25.Line styles.en.srt | 6.6 KB |
| 6.5. Using Additional Settings in Revit/25.Line styles.mp4 | 9.9 MB |
| 6.5. Using Additional Settings in Revit/26.Lineweights.en.srt | 4.9 KB |
| 6.5. Using Additional Settings in Revit/26.Lineweights.mp4 | 8.6 MB |
| 6.5. Using Additional Settings in Revit/27.Line patterns.en.srt | 5.3 KB |
| 6.5. Using Additional Settings in Revit/27.Line patterns.mp4 | 8.3 MB |
| 6.5. Using Additional Settings in Revit/28.Halftone_Underlay.en.srt | 7.3 KB |
| 6.5. Using Additional Settings in Revit/28.Halftone_Underlay.mp4 | 10.8 MB |
| 6.5. Using Additional Settings in Revit/29.Matching settings to AutoCAD standards.en.srt | 13 KB |
| 6.5. Using Additional Settings in Revit/29.Matching settings to AutoCAD standards.mp4 | 21.3 MB |
| 7.6. Creating Standard Details in Revit/30.Creating a new drafting view.en.srt | 4.7 KB |
| 7.6. Creating Standard Details in Revit/30.Creating a new drafting view.mp4 | 7.1 MB |
| 7.6. Creating Standard Details in Revit/31.Importing the CAD detail drawing.en.srt | 4.4 KB |
| 7.6. Creating Standard Details in Revit/31.Importing the CAD detail drawing.mp4 | 6.6 MB |
| 7.6. Creating Standard Details in Revit/32.Exploding the CAD detail drawing.en.srt | 3.1 KB |
| 7.6. Creating Standard Details in Revit/32.Exploding the CAD detail drawing.mp4 | 4.6 MB |
| 7.6. Creating Standard Details in Revit/33.Converting the lines to Revit lines.en.srt | 7.6 KB |
| 7.6. Creating Standard Details in Revit/33.Converting the lines to Revit lines.mp4 | 12.8 MB |
| 7.6. Creating Standard Details in Revit/34.Converting the text to Revit text.en.srt | 7.2 KB |
| 7.6. Creating Standard Details in Revit/34.Converting the text to Revit text.mp4 | 11.2 MB |
| 7.6. Creating Standard Details in Revit/35.Tidying up the other annotation on the detail.en.srt | 6.5 KB |
| 7.6. Creating Standard Details in Revit/35.Tidying up the other annotation on the detail.mp4 | 9.8 MB |
| 8.7. Working with Imported Categories/36.Working with the Visibility_Graphics Overrides dialog box.en.srt | 5.3 KB |
| 8.7. Working with Imported Categories/36.Working with the Visibility_Graphics Overrides dialog box.mp4 | 8.1 MB |
| 8.7. Working with Imported Categories/37.Visibility.en.srt | 6.2 KB |
| 8.7. Working with Imported Categories/37.Visibility.mp4 | 8.8 MB |
| 8.7. Working with Imported Categories/38.Projections and surfaces - Lines.en.srt | 9.4 KB |
| 8.7. Working with Imported Categories/38.Projections and surfaces - Lines.mp4 | 15.5 MB |
| 8.7. Working with Imported Categories/39.Using object styles.en.srt | 11.6 KB |
| 8.7. Working with Imported Categories/39.Using object styles.mp4 | 19.3 MB |
| 8.7. Working with Imported Categories/40.Halftone.en.srt | 5.4 KB |
| 8.7. Working with Imported Categories/40.Halftone.mp4 | 9.2 MB |
| 9.8. Annotation/41.Using Revit text to replicate your CAD text styles.en.srt | 3 KB |
| 9.8. Annotation/41.Using Revit text to replicate your CAD text styles.mp4 | 4.6 MB |
| 9.8. Annotation/42.Text families.en.srt | 6.7 KB |
| 9.8. Annotation/42.Text families.mp4 | 10.5 MB |
| 9.8. Annotation/43.Text fonts and sizes.en.srt | 11.1 KB |
| 9.8. Annotation/43.Text fonts and sizes.mp4 | 16.4 MB |
| 9.8. Annotation/44.Using text colors.en.srt | 7.8 KB |
| 9.8. Annotation/44.Using text colors.mp4 | 11 MB |
| 9.8. Annotation/45.Using text settings - Bold, italic, and underline.en.srt | 5.8 KB |